Frigidaire washer is not spinning

A Frigidaire washer not spinning can disrupt your laundry routine, leaving you with soaking wet clothes and extra drying time. If your washer drum refuses to spin, the issue could stem from anything as simple as an unbalanced load to more complex mechanical failures like a worn-out drive belt or a faulty motor coupling.

Before calling a repair technician, there are several troubleshooting steps you can take to diagnose and fix the issue yourself. In this guide, we’ll go over the most common reasons why a Frigidaire washer won’t spin and what you can do to resolve the problem.

Key reasons for the problem:

50% of reported issues are the

Faulty Lid Switch Assembly

35% of reported issues are the

Worn or Broken Drive Belt

13% of reported issues are the

Damaged Motor Coupling

2% of reported issues are the

All Other Causes

Diagnostic and troubleshooting steps

If your Frigidaire washer isn't spinning, don't worry—you're not alone. This step-by-step guide covers the most common reasons your washer might stop spinning, from worn-out drive belts to faulty lid switches and clogged drain pumps. We'll walk you through practical fixes to help restore your washer's full functionality in no time.

Step 1:

Check for Load Balance Issues

Open the washer and redistribute your laundry to ensure even weight distribution.
Avoid washing heavy items like blankets alone—balance them with lighter garments.

Step 2:

Inspect the Lid Switch or Door Lock

For top-load washers, press the lid switch manually to see if it clicks.
For front-load washers, ensure the door lock mechanism engages properly.
If the switch or lock appears damaged, replace it.

Step 3:

Examine the Drive Belt

Unplug the washer and remove the back panel to inspect the drive belt.
If the belt is loose or frayed, install a new one according to the manufacturer’s instructions.

Step 4:

Clear the Drain Pump

Check for water buildup in the drum, which may indicate a clogged drain.
Locate the drain pump filter (usually at the front or bottom of the washer),remove any debris, and test the washer again.

Step 5:

Reset the Washer

Sometimes, electronic glitches can cause the washer to stop spinning. Unplug the washer for a few minutes, then plug it back in and run a spin cycle test.

Key actions for homeowners:

Avoid overloading your washer to prevent strain on the motor and drum.
Clean the drain pump filter regularly to prevent clogs.
Inspect the drive belt and motor coupling every few months for signs of wear.
Ensure the washer is level to prevent balance issues during the spin cycle.

Most common repairs needed to fix a frigidaire washer that is not spinning

When your Frigidaire washer is not spinning, certain repairs are more commonly required than others. Below are the most frequent fixes:

Replace a Worn-Out Drive Belt: The drive belt in your Frigidaire washer connects the motor to the drum, allowing it to spin during the wash cycle. Over time, the belt can become loose, frayed, or completely break, preventing the washer from spinning properly. If you hear the motor running but notice that the drum isn’t moving, the drive belt could be the culprit.
Inspect and Replace a Faulty Lid Switch (Top-Load Washers): For top-load washers, the lid switch is a crucial safety feature that prevents the washer from spinning when the lid is open. If the switch malfunctions, the washer may not recognize that the lid is closed, stopping the spin cycle from starting. Replacing the switch could resolve the issue and allow your washer to spin normally.
Repair or Replace a Malfunctioning Door Lock (Front-Load Washers): Front-load washers rely on a secure door lock to engage the spin cycle. If the door lock mechanism is broken, misaligned, or defective, the washer may not start spinning. You may notice that the door isn’t latching properly or that an error code appears on the display. Inspect the door lock for visible damage, and if necessary, replace it.

Frequently Asked Questions

Why is my Frigidaire washer not spinning but still filling and draining?
If your Frigidaire washer fills and drains but won’t spin, the issue could be a worn-out drive belt, a faulty lid switch (for top-load models),or a malfunctioning door lock (for front-load models). Additionally, a broken motor coupling or a defective control board may prevent the spin cycle from engaging. Start by checking for unbalanced loads or clogged drain pumps.
How do I reset my Frigidaire washer if it won’t spin?
To reset your Frigidaire washer, unplug it from the power source for about 5–10 minutes. This can help clear minor electronic glitches. After plugging it back in, select a spin cycle and see if the issue is resolved. If the washer still won’t spin, you may need to inspect mechanical components like the lid switch, drive belt, or motor.
What should I do if my Frigidaire washer stops spinning mid-cycle?
If your washer stops spinning in the middle of a cycle, it could be due to an unbalanced load, a clogged drain pump, or a faulty control board. Try redistributing your laundry to balance the load and restart the cycle. If water remains in the drum, check for drain blockages. If the issue persists, a more serious mechanical failure, like a damaged motor or sensor, may require professional repair.
Can I fix a Frigidaire washer that won’t spin on my own, or should I call a professional?
Some common spin-related issues, like an unbalanced load, clogged drain pump, or faulty lid switch, can be fixed at home with basic tools. However, if the problem involves the motor, drive belt, control board, or other complex components, professional repair is recommended. If you're unsure or don’t have experience with appliance repairs, calling a technician ensures the issue is fixed safely and correctly.

Want to view more?

The Most Consumer Centric
Home Warranty Provider.

Homeowners across the country recommend Liberty Home Guard Home Warranty above all others.
Don’t just take our word for it—Liberty Home Guard Reviews speak for themselves!

We love working with liberty home gu...

We love working with liberty home guard. We are always able to get in touch with a live person and payments are always made in a t...

Sentinel Plumbing LLC

They will try to help you the best t...

They will try to help you the best they can. Fair price and excellent service , Adam helped me with all my questions and had solut...

Mario L

I want to extend my sincere apprecia...

I want to extend my sincere appreciation to Annie Núñez for her remarkable performance in Dispatch at Liberty Home Guard. Her de...

Michel Ramirez

I've had the pleasure of working wit...

I've had the pleasure of working with Ronald at Liberty Home Guard as my account manager, and I couldn't be more impressed. Ronald...

Emily F

Helpful and reliable service!!

Stephanie K

I’m leaving a review of my experie...

I’m leaving a review of my experience signing up with liberty home guard. My sales person was Freddy, he was friendly and flexib...

Lawton J

Very helpful.

Lori G

I have made three claims with Libert...

I have made three claims with Liberty and all have gone well; I always expect it to be a pain because most insurance is, but Liber...

Janna C

I want to thank the team at Liberty ...

I want to thank the team at Liberty Home Guard and especially John Vasquez, for the exceptional and professional work they do when...

Michel R

I called in to file a claim, and Ros...

I called in to file a claim, and Rose from the claims department was wonderful. I'm greatly appreciative of her patience and compa...

Lesly P