Why is my Samsung washer vibrating excessively?

Common causes include an unbalanced load, overloading, an uneven floor, improperly adjusted leveling legs, shipping bolts left in place, or worn suspension components.

Can an unbalanced load make a Samsung washer shake?

Yes. Heavy or unevenly distributed laundry can throw the drum off balance during the spin cycle, causing the washer to shake or move.

How do I level a Samsung washer?

Place a level on top of the washer and adjust the leveling legs until the machine sits evenly. The washer should not rock when pressure is applied to the corners.

When should I call a technician for a vibrating washer?

Call a technician if the washer continues to vibrate after balancing the load, leveling the machine, checking the floor, and confirming the shipping bolts are removed.

Does a home warranty cover washer repairs?

A home warranty can help cover eligible washer repair or replacement costs when a covered appliance fails due to normal wear and tear, depending on the plan terms and conditions.

Samsung Washer Vibrating Excessively

By: Angel Vallejo

A washing machine that rocks, rattles, and thumps its way through a spin cycle isn't just annoying — it can damage your floors, loosen internal components over time, and even cause the machine to walk itself across the room. If your Samsung washer is vibrating excessively, the good news is that the most common causes are well understood and many of them are DIY-friendly fixes. The key is identifying where the problem is coming from before it gets worse.
This guide walks through every major cause of a Samsung washing machine shaking, from the easiest fixes to the more involved repairs, so you can troubleshoot systematically and get things back to normal.

Extend the Life of Your Appliance

Find Your Solution Here!

Learn More

Key Reasons for the Problem:

40% of reported issues are the

Worn suspension rods or dampers

30% of reported issues are the

Washer not level / shipping bolts still installed

30% of reported issues are the

Overloading or unbalanced loads

10% of reported issues are the

All Other Causes

One Plan. Every Appliance. Zero Stress.

Extended warranties only cover one item. Liberty Home Guard protects all your appliances and systems under one simple plan.
If it breaks, we’ve got you covered—no matter the brand.

Get My Free Quote

Diagnostic and Troubleshooting Steps

When your Samsung washer is vibrating excessively, certain adjustments and repairs are more commonly required than others. Below are the most frequent fixes:

Step 1:

Check for Shipping Bolts

If you recently installed a new Samsung front-load washer, verify the shipping bolts have been removed from the rear panel.
Open the door and push on the drum. If it feels rigid and immovable, the bolts are still in. A properly installed drum should have noticeable spring-loaded movement.

Step 2:

Level the Washer

Rock the machine side to side and front to back. Any wobble indicates at least one leg isn’t grounded.
Use a bubble level placed on top of or inside the drum, then adjust the leveling legs until the machine sits firmly on all four corners.

Step 3:

Inspect and Redistribute the Load

If shaking occurs mainly during spin, open the washer, redistribute items evenly around the drum, and restart the spin cycle.
Avoid washing single heavy items or large absorbent items like comforters without balancing items.

Step 4:

Check for the UB Error Code

A UB (Unbalanced) error code means the machine stopped the spin cycle to protect itself. Redistribute the load and resume.
If the error recurs with balanced loads, the issue is likely mechanical.

Step 5:

Inspect the Shock Absorbers

If the washer shakes hard during spin regardless of load, the shock absorbers (dampers) may be worn. Listen for loud banging or thumping, and watch for the drum visibly lurching or hitting the cabinet sides.
Replacement requires accessing the machine interior.

Step 6:

Check Suspension Springs and Drum Bearings

Inspect suspension springs for stretching, disconnection, or breakage.
Listen for rumbling or grinding noises that indicate worn drum bearings. Bearing replacement is complex and may warrant professional service.

Step 7:

Get a Home Warranty

A home warranty like Liberty Home Guard can make appliance repairs feel less expensive and less stressful.

Key Actions for Homeowners:

Remove shipping bolts before the first use of a new front-load washer.
Level the washer on all four legs and use an anti-vibration mat on soft flooring.
Always balance loads and avoid washing single heavy or large items alone.
Reduce spin speed for bulky or delicate items to minimize vibration.
Inspect and replace shock absorbers and suspension springs as they wear.
Consider getting a home warranty to help cover unexpected washer repairs and reduce out-of-pocket costs.

Most Common Repairs Needed to Fix a Samsung Washer Vibrating Excessively

When your Samsung washer is shaking or vibrating, certain repairs are more commonly required than others. Below are the most frequent fixes:

Remove Shipping Bolts: On newly installed front-load washers, shipping bolts lock the drum in place during transport. Leaving them in causes severe vibration during every cycle and must be corrected before use.
Level the Washer: Adjusting the four leveling legs so the machine sits firmly and flat on the floor eliminates rocking-induced vibration, one of the most common and easily corrected causes.
Use an Anti-Vibration Mat: For washers on soft flooring like carpet or vinyl, an anti-vibration mat reduces the energy transferred to the floor and helps prevent the machine from ‘walking’ during spin cycles.

GET YOUR QUOTE

Frequently Asked Questions

Why is my Samsung washer vibrating excessively?
Common causes include shipping bolts that weren’t removed, an unlevel machine, an unbalanced load, or worn internal components like shock absorbers or suspension springs. Start with the simplest checks before opening the machine.
How do I stop my Samsung washer from shaking during the spin cycle?
Begin by confirming the shipping bolts are removed, the washer is level, and the load is evenly distributed. If those checks don’t resolve it, inspect the shock absorbers, suspension springs, and drum bearings for wear.
What does the UB error code on my Samsung washer mean?
UB stands for Unbalanced. The machine detected an uneven load and stopped the spin cycle to prevent damage. Redistribute the laundry and resume the cycle. If it recurs with balanced loads, a worn suspension component may be the cause.
Can I fix a Samsung washer vibrating excessively on my own?
Many causes, like removing shipping bolts, leveling the machine, and rebalancing loads, are simple DIY fixes. Shock absorber and spring replacement are moderately involved but manageable for handy homeowners. Drum bearing replacement is more complex and often warrants professional service.
Should I call a technician if my Samsung washer is still shaking after troubleshooting?
Yes. If basic steps haven’t resolved the issue, a worn internal component is likely to blame. A qualified technician can diagnose and repair shock absorbers, springs, or bearings safely and efficiently

Want to view more?

The Most Consumer Centric
Home Warranty Provider.

Homeowners across the country recommend Liberty Home Guard Home Warranty above all others.
Don’t just take our word for it—Liberty Home Guard Reviews speak for themselves!

Oscar was very thorough and competen...

Oscar was very thorough and competent. He arrived on time and finished the electrical work quickly. He was very friendly and answe...

Mimi C.

I did some research before I looked ...

I did some research before I looked for a Home Warranty Company and I also looked at the BBB ratings before I made my decision. Li...

Sally W.

I am impressed with the service I re...

I am impressed with the service I received from Keith Gordon. He explained extensively and clearly what in included in the warrant...

Exie R.

Daniel in Customer service was very ...

Daniel in Customer service was very helpful in setting up a service call. I appreciate the prompt effort.

Frank A.

same day responsive to claim. techni...

same day responsive to claim. technician assigned very quickly. also follow up after completion!

Vince A.

Rocky Phillips was very nice and hel...

Rocky Phillips was very nice and helpful amazing person, very patient, and very good to work with. Overall amazing &nbs...

Seven S.

I've been with Liberty for three yea...

I've been with Liberty for three years now and very pleased on how they process claims and pay on time. Looking forward to working...

Rathin S.

This is review is for Kato Nunez. He...

This is review is for Kato Nunez. He was a great in resolving my issue. I really appreciate his patience and excellent customer se...

Mohammad K.

Orlando Peralta provided excellent c...

Orlando Peralta provided excellent customer service. He thoroughly explained the status of my claim and what I needed to do. He pr...

JSL

Jay Cruz was great about explaining ...

Jay Cruz was great about explaining the contractor onboarding and very helpful with process

Ricky S.