Why is my GE washer not spinning even though it drains?

If your washer drains but doesn’t spin, common causes include a worn drive belt, damaged motor coupling, or an unbalanced load. :contentReference[oaicite:10]{index=10}

How do I reset my GE washer when it won’t spin?

Unplug the washer for 5–10 minutes, then plug it back in and try a spin cycle. This may clear control board faults. :contentReference[oaicite:11]{index=11}

When should I call a professional for my GE washer that won’t spin?

If you’ve checked load balance, lid switch, belt and pump and the washer still won’t spin, it’s time to call a technician—especially if major mechanical or electronic components are involved. :contentReference[oaicite:12]{index=12}

Ge washer is not spinning

A GE washer not spinning can be frustrating, especially when clothes come out soaking wet after a wash cycle. This issue is often caused by problems like an unbalanced load, a faulty lid switch, a worn-out drive belt, or a malfunctioning motor. Fortunately, many of these problems can be diagnosed and fixed with basic troubleshooting steps.

In this guide, we’ll cover the most common reasons your GE washer won’t spin and provide practical solutions to restore its functionality.

Key reasons for the problem:

50% of reported issues are the

Faulty Lid Switch Assembly

35% of reported issues are the

Worn or Broken Drive Belt

13% of reported issues are the

Damaged Motor Coupling

2% of reported issues are the

All Other Causes

Diagnostic and troubleshooting steps

Is your GE washer not spinning? This step-by-step guide breaks down the most common causes—from a faulty lid switch to a worn-out drive belt—and offers practical solutions to restore your washer’s spin cycle and performance.

Step 1:

Check for Unbalanced Loads

Pause the cycle and redistribute the clothes evenly.
Reduce the load size if the drum is overloaded.

Step 2:

Inspect the Lid Switch or Door Lock

For top-load washers, test the lid switch with a multimeter.
For front-load washers, check the door latch and replace it if necessary.

Step 3:

Examine the Drive Belt and Motor Coupling

Remove the washer’s back panel and inspect the belt for damage.
If the belt or coupling is worn out, replace it.

Step 4:

Clear the Drain Pump

Remove any debris blocking the drain pump.
If the pump is making unusual noises, consider replacing it.

Step 5:

Reset the Control Board

Unplug the washer for a few minutes, then restart it to reset the electronics.
If the problem persists, a control board replacement may be needed.

Step 6:

Get a Home Warranty to Avoid Emergency Repair Fees

Emergency appliance fixes can be expensive—home warranties, like those from Liberty Home Guard, reduce that burden.

Key actions for homeowners:

Avoid overloading the washer. Always follow the manufacturer’s load size recommendations.
Clean the drain pump filter regularly. Lint, hair, and small debris can clog the drain pump, affecting the washer’s ability to spin.
Check the drive belt for signs of wear and replace it as needed.
Ensure the lid switch (for top-load washers) or door lock (for front-load washers) is working correctly to allow the spin cycle to engage.
Level the washer to prevent imbalance. Adjust the leveling feet to keep the washer stable during operation.

Most common repairs needed to fix a ge washer that is not spinning

When your GE washer will not spin, certain repairs are more commonly required than others. Below are the most frequent fixes:

Replace a Worn-Out Drive Belt: The drive belt connects the motor to the drum, allowing it to spin. If the belt is loose, frayed, or broken, the washer won’t be able to enter the spin cycle.
Replace a Broken Motor Coupling: The motor coupling connects the motor to the transmission. If it breaks, the washer may still fill and drain but won’t spin.

Frequently Asked Questions

Why is my GE washer not spinning but still draining?
If your washer drains but doesn’t spin, the issue could be a broken drive belt, a faulty motor coupling, or an unbalanced load. Inspect these components and replace them if necessary.
How do I reset my GE washer?
To reset a GE washer, unplug it for 5-10 minutes, then plug it back in and restart the cycle. If the issue persists, check for underlying mechanical problems.
Can a clogged drain pump prevent my washer from spinning?
Yes. A clogged drain pump can cause water to back up, preventing the washer from entering the spin cycle. Cleaning the pump may resolve the issue.
How do I know if my washer’s drive belt is bad?
Signs of a worn-out drive belt include a washer that won’t spin, a loose or slipping belt, or a burning smell. If you notice any of these, replace the belt.

Want to view more?

The Most Consumer Centric
Home Warranty Provider.

Homeowners across the country recommend Liberty Home Guard Home Warranty above all others.
Don’t just take our word for it—Liberty Home Guard Reviews speak for themselves!

Had a fantastic experience with JP L...

Had a fantastic experience with JP Luna during a recent service call. He was professional, efficient, and went above and beyond to...

Pace Appliance

I'm so glad I switched to Liberty. T...

I'm so glad I switched to Liberty. They were quick to respond to my request and covered the work that needed to be done.

Debra Dockins

Dante Vega customer service rep at l...

Dante Vega customer service rep at liberty home warranty handle all my new work orders assuring me a steady work flow for the comp...

Nat Stew

Liberty home guard sent Reynaldo fro...

Liberty home guard sent Reynaldo from RRB Plumbing. He was very patient, understanding, professional and helpful. He fixed the wat...

finstpnjbi

I got the pleasure of dealing with O...

I got the pleasure of dealing with Otis Luna. He was spectacular very knowledgeable and very helpful. I would like to congratulate...

maria elena perez

Best Service ever . Héctor Díaz is...

Best Service ever . Héctor Díaz is an Amazing Agent. So diligent and nice

respalcorpElectric

The young man was very helpful. I ha...

The young man was very helpful. I have three claims pending, and they all have different stages and phases and it’s very difficu...

Steven Todd

Tony provided great customer service...

Tony provided great customer service! He was attentive and efficient thank you

Angela DiGuiseppi

Great job. Would highly recommend th...

Great job. Would highly recommend the technician!! And fast: our dryer needed repair on a Friday and by the following Tuesday we h...

Larry Feinstein

The support-person was very knowledg...

The support-person was very knowledgeable and gave me the information I needed to make my decision. Suppoet-person was Tony Torres...

John Mangan