Why isn't my Kenmore Elite dryer starting?

Common causes include a blown thermal fuse, faulty door switch, defective start switch, or a worn-out drive motor.

How can I test the thermal fuse on my Kenmore dryer?

Use a multimeter to check for continuity. If there's no continuity, the fuse is blown and needs replacement.

What should I do if the dryer door isn't closing properly?

Ensure there's nothing obstructing the door. Clean the latch area and try closing it firmly. If it still doesn't close, the door switch may need replacement.

Can a faulty control board prevent my dryer from starting?

Yes, a damaged control board can disrupt the dryer's operation. Inspect for visible damage and consider replacing it if necessary.

Kenmore Elite Dryer Not Starting

Your Kenmore Elite dryer is an essential appliance for keeping your household running smoothly. When it suddenly won’t start, it can disrupt your routine and leave you searching for solutions. If you’re dealing with a Kenmore Elite dryer not starting, don’t worry—this guide will walk you through potential causes, troubleshooting tips, and repair options to get your dryer back up and running.

Extend the Life of Your Appliance

Find Your Solution Here!

Learn More

Key Reasons for the Problem:

40% of reported issues are the

Thermal Fuse

35% of reported issues are the

Door Switch

20% of reported issues are the

Drive Motor

5% of reported issues are the

All Other Causes

One Plan. Every Appliance. Zero Stress.

Extended warranties only cover one item. Liberty Home Guard protects all your appliances and systems under one simple plan.
If it breaks, we’ve got you covered—no matter the brand.

Get My Free Quote

Diagnostic and Troubleshooting Steps

Is your Kenmore Elite dryer not starting but other functions still seem normal? This step-by-step guide covers everything from electrical components to door switch issues, and offering practical solutions.

Step 1:

Check the Power Supply

Verify that the dryer is plugged into a working outlet.
Inspect your home’s circuit breaker and reset it if necessary.
If you suspect a damaged power cord, consider testing it with a multimeter or replacing it.

Step 2:

Inspect the Door Switch

Ensure the door is closing securely and the latch is engaging properly.
Listen for a clicking sound when pressing the door switch. If you don’t hear it, the switch may need replacement.

Step 3:

Test the Start Switch

Press the start button and listen for a humming noise. If there’s no sound, the start switch could be faulty and require replacement.

Step 4:

Examine the Thermal Fuse

Locate the thermal fuse on the dryer’s blower housing or near the heating element.
Test the fuse with a multimeter for continuity. If it’s blown, replace it, but also inspect for underlying causes, such as clogged vents.

Step 5:

Inspect the Drive Motor

If the drum doesn’t rotate or you hear unusual noises when attempting to start the dryer, the motor might be worn out and need replacement.

Step 6:

Evaluate the Control Board

Look for visible damage, like burn marks or loose connections on the control board.
If the board isn’t functioning, it’s best to call a professional to replace it.

Step 7:

Get a Home Warranty for Smart, Budget-Friendly Protection

Home warranties are a smart way to reduce appliance repair costs. Liberty Home Guard is one example of what's available.

Key Actions for Homeowners:

Clean the lint trap after every load.
Inspect and clean the vent system. Blocked vents can cause overheating and strain on the motor.
Avoid overloading the dryer as it can put extra strain on the motor and drum, increasing wear and tear.
Check for loose connections periodically.
Schedule routine maintenance to identify and address minor issues before they become major problems.

Most Common Repairs Needed to Fix Kenmore Elite Dryers

When your dryer is not starting, certain repairs are more commonly required than others. Below are the most frequent fixes:

Replace a Blown Thermal Fuse: The thermal fuse prevents overheating and must be replaced if it’s blown.
Repair or Replace the Door Switch: A malfunctioning door switch can stop the dryer from running, even if the door appears closed.
Fix a Faulty Start Switch: If the start switch is defective, pressing the button won’t activate the drying cycle.
Replace the Drive Motor: A worn-out drive motor can prevent the drum and blower from operating, leaving the dryer non-functional.

GET YOUR QUOTE

Frequently Asked Questions

Why won’t my Kenmore Elite dryer start even though it has power?
If your Kenmore Elite dryer has power but won’t start, the issue may be related to a faulty door switch, a blown thermal fuse, or a defective start switch. Ensure the dryer door is fully closed, and check for any error codes on the display.
How do I reset my Kenmore Elite dryer?
To reset your Kenmore Elite dryer, unplug it from the power source for about 5 minutes. This allows the internal components to reset. Plug it back in and try starting the dryer. If it still doesn’t work, the issue may require further troubleshooting.
How can I tell if the thermal fuse in my dryer is blown?
A blown thermal fuse will prevent your dryer from starting. You can test the thermal fuse with a multimeter for continuity. If it has no continuity, it’s blown and needs replacement. Be sure to check for clogged vents or other overheating causes before replacing the fuse.
When should I call a professional to repair my Kenmore Elite dryer?
Call a professional if you’ve checked the power supply, door latch, and basic components but the dryer still won’t start. Professional help is also recommended for complex repairs, such as replacing the control board, drive motor, or internal wiring.

Want to view more?

The Most Consumer Centric
Home Warranty Provider.

Homeowners across the country recommend Liberty Home Guard Home Warranty above all others.
Don’t just take our word for it—Liberty Home Guard Reviews speak for themselves!

Talked with Brad Spelling and Lucas ...

Talked with Brad Spelling and Lucas Marin. They were cordial and explained the details of the plan very well.

Rohit N.

Albert Cendejas, the technician who ...

Albert Cendejas, the technician who installed my HVAC, was very professional and thorough with his work. His attention to detail a...

Barb R.

Rocky Phillips called us to accept a...

Rocky Phillips called us to accept a plumbing job. It was easy and quick to accept. We enjoy working with Liberty Home Guard and t...

Diamond Plumbing

I am impressed with the service I re...

I am impressed with the service I received from Keith Gordon. He explained extensively and clearly what in included in the warrant...

Exie R.

This is review is for Kato Nunez. He...

This is review is for Kato Nunez. He was a great in resolving my issue. I really appreciate his patience and excellent customer se...

Mohammad K.

layla helped me process my claim She...

layla helped me process my claim She was very helpful and I could not have done it without her cheerful help

Suzanne Q.

Orlando Peralta provided excellent c...

Orlando Peralta provided excellent customer service. He thoroughly explained the status of my claim and what I needed to do. He pr...

JSL

Oscar was very thorough and competen...

Oscar was very thorough and competent. He arrived on time and finished the electrical work quickly. He was very friendly and answe...

Mimi C.

We had an excellent experience from ...

We had an excellent experience from start to finish! Great communication, our issue was resolved within approximately 1 weeks time...

Jacqueline L.

Comprehensive coverage and fast easy...

Comprehensive coverage and fast easy sign up. Much more competitive than other options in the market.

Joe M.