Why is my Hotpoint washer not spinning but still draining?

If your washer is draining but not spinning, the issue may be a broken drive belt, a malfunctioning motor coupling, or a worn-out clutch. These components are essential for drum rotation and may need repair or replacement.

How do I fix a Hotpoint washer that won’t spin?

Start by checking for an imbalanced load, ensuring the lid is securely closed, and inspecting the drain system for clogs. If these steps don’t resolve the issue, inspect components like the drive belt, lid switch, or motor coupling, and replace any damaged parts.

Can an overloaded washer cause it to stop spinning?

Yes, overloading the washer can cause the drum to become unbalanced, preventing it from spinning. Redistribute or remove some items and try running the spin cycle again.

When should I call a professional for my Hotpoint washer not spinning?

Call a professional if you’ve ruled out simple fixes like imbalanced loads or clogged drains. Complex issues like a malfunctioning control board, motor problems, or clutch replacements typically require expert tools and experience.

Hotpoint washer not spinning

A washer that doesn’t spin can be frustrating, especially when your laundry schedule is disrupted. If you’re dealing with a Hotpoint washer that’s not spinning, don’t worry—there are several potential causes, many of which can be resolved with simple troubleshooting. Walk through the common reasons behind this problem and how to troubleshoot it.

Key reasons for the problem:

50% of reported issues are the

Lid Switch Assembly

30% of reported issues are the

Drive Belt

15% of reported issues are the

Motor Coupling

5% of reported issues are the

All Other Causes

Diagnostic and troubleshooting steps

Is your Hotpoint washer not spinning? This step-by-step guide covers everything from drive belts to control boards, and offering practical solutions.

Step 1:

Check for an Imbalanced Load

Stop the washer and redistribute the clothes inside the drum.
Remove excess items if the drum is overloaded.
Restart the cycle to see if the washer spins properly.

Step 2:

Inspect the Lid Switch

Ensure the washer lid is closing securely.
Listen for a clicking sound when you close the lid. If you don’t hear a click, the lid switch may need replacement.

Step 3:

Examine the Drain System

Check the drain hose for kinks, blockages, or clogs.
Inspect the drain pump for debris that may be preventing water from draining.
Clear any clogs and try running the washer again.

Step 4:

Inspect the Drive Belt

Unplug the washer and access the drive belt by removing the back panel.
Check the belt for signs of wear, fraying, or breakage. If it’s damaged, replace it.

Step 5:

Test the Motor Coupling

Disconnect the washer from the power source and access the motor coupling.
Inspect the coupling for cracks or damage. Replace it if necessary.

Step 6:

Check the Clutch Assembly

If the washer drum spins but struggles to reach the proper speed, the clutch may be worn out.
Replacing the clutch requires disassembling parts of the washer, so professional assistance may be needed.

Step 7:

Test the Timer and Control Board

Inspect the timer and control board for visible damage, such as burned-out circuits or loose connections.
If these components aren’t functioning, they may need repair or replacement.

Step 8:

Get a Home Warranty That Helps When Appliances Fail

Avoid major out-of-pocket costs with coverage from providers like Liberty Home Guard.

Key actions for homeowners:

Avoid overloading the washer.
Clean the drain system regularly.
Check for loose items to avoid damage to internal components.
Perform routine inspections of the drive belt, motor coupling, and other components for signs of wear or damage.
Use a washer cleaning solution or vinegar to clean the drum and prevent residue buildup.

Most common repairs needed to fix hotpoint washers

When your washer is not spinning, certain repairs are more commonly required than others. Below are the most frequent fixes:

Replace a Broken Drive Belt: The drive belt powers the drum’s rotation. A worn or snapped belt needs replacement to restore spinning.
Install a New Motor Coupling: If the motor coupling that connects the motor to the drum is broken, it will need to be replaced.
Fix or Replace the Clutch Assembly: A worn-out clutch can stop the drum from spinning at the proper speed and requires replacement.
Fix Loose or Broken Suspension Springs: Damaged springs can lead to unbalanced loads, preventing the washer from spinning properly.

Frequently Asked Questions

Why is my Hotpoint washer not spinning but still draining?
If your washer is draining but not spinning, the issue may be a broken drive belt, a malfunctioning motor coupling, or a worn-out clutch. These components are essential for drum rotation and may need repair or replacement.
How do I fix a Hotpoint washer that won’t spin?
Start by checking for an imbalanced load, ensuring the lid is securely closed, and inspecting the drain system for clogs. If these steps don’t resolve the issue, inspect components like the drive belt, lid switch, or motor coupling, and replace any damaged parts.
Can an overloaded washer cause it to stop spinning?
Yes, overloading the washer can cause the drum to become unbalanced, preventing it from spinning. Redistribute or remove some items and try running the spin cycle again.
When should I call a professional for my Hotpoint washer not spinning?
Call a professional if you’ve ruled out simple fixes like imbalanced loads or clogged drains. Complex issues like a malfunctioning control board, motor problems, or clutch replacements typically require expert tools and experience.

Want to view more?

The Most Consumer Centric
Home Warranty Provider.

Homeowners across the country recommend Liberty Home Guard Home Warranty above all others.
Don’t just take our word for it—Liberty Home Guard Reviews speak for themselves!

Nai was Excellent at servicing my ca...

Nai was Excellent at servicing my call. Excellent customer service and response.

Maria MA.

A great company for veterans!

P Kennebrew

Rocky Phillips, the Supervisor of th...

Rocky Phillips, the Supervisor of the Vendor Relations Department at Liberty Home Guard, is an exceptional manager at Liberty Home...

Wes

Ely provided excellent service. Very...

Ely provided excellent service. Very helpful and knowledgeable! I spoke with Justin regarding my claim status and he was very help...

Bill C.

The technicians arrived on time and ...

The technicians arrived on time and completed on time. They were very professional. They kept in communication throughout the proj...

Rae J.

Liberty Home Guard is so supportive ...

Liberty Home Guard is so supportive and follows through to make sure the repair is complete. I am treated with courtesy and respec...

Pat F

Annie Nunez was awesome calling us t...

Annie Nunez was awesome calling us to take care of a valued customer. We couldn’t be more thrilled to continue working with her ...

Cole J.

George Morel is great at his job! Ve...

George Morel is great at his job! Very polite. A pleasure to work with.

Denise A.

Super nice and professional

Elevate

Rocky Phillips helped me tremendousl...

Rocky Phillips helped me tremendously to get my authorization and approval number on my recent claim. Couldn't be happier!

Larry P