Why is my KitchenAid oven not getting hot enough?

Common reasons include a faulty temperature sensor, damaged heating elements, or the need for recalibration.

How do I know if my oven igniter is bad?

If the igniter glows but does not ignite the burner within about 90 seconds, it likely needs replacing.

Can I replace a heating element myself?

In many cases, yes — but always unplug the appliance first. If you're unsure, it's best to call a technician.

When should I call for service?

If after performing the basic checks (power, elements, sensor, reset) the oven still won’t heat properly, it’s time to bring in a professional—especially for control-board or igniter issues.

KitchenAid Oven Not Heating Properly

By: Angel Vallejo

If your KitchenAid oven isn't heating up or is struggling to maintain the right temperature, it can quickly turn meal prep into a hassle. Whether you’re dealing with undercooked food or a completely cold oven, this guide covers the most likely causes and practical steps to fix the issue.

Extend the Life of Your Appliance

Find Your Solution Here!

Learn More

Key Reasons for the Problem:

50% of reported issues are the

Bake Element

30% of reported issues are the

Faulty Igniter

15% of reported issues are the

Temperature Sensor

5% of reported issues are the

All Other Causes

One Plan. Every Appliance. Zero Stress.

Extended warranties only cover one item. Liberty Home Guard protects all your appliances and systems under one simple plan.
If it breaks, we’ve got you covered—no matter the brand.

Get My Free Quote

Diagnostic and Troubleshooting Steps

KitchenAid oven not heating properly? Follow the steps below to troubleshoot common issues like a faulty bake element, malfunctioning temperature sensor, or a defective control board.

Step 1:

Test Power Supply

Make sure the oven is plugged in and that the circuit breaker hasn’t tripped. A power interruption can prevent the oven from turning on or heating.

Step 2:

Inspect Heating Elements

Look for visible signs of damage or discoloration on the bake and broil elements. A broken element typically won’t glow red when in use.

Step 3:

Check the Igniter (Gas Ovens)

Turn the oven on and observe the igniter. If it glows but doesn’t ignite the flame, it likely needs to be replaced.

Step 4:

Verify Temperature Sensor Function

Check that the temperature sensor inside the oven isn’t loose or damaged. You can test it for continuity using a multimeter.

Step 5:

Reset the Oven

Try resetting the oven by switching off the circuit breaker for 1–2 minutes, then turning it back on.

Step 6:

Listen for Unusual Noises

Clicking or buzzing sounds during startup may indicate issues with the relay or control board.

Step 7:

Get a Home Warranty When Repairs Add Up

If you’ve already paid for multiple appliance repairs, it may be time to let a company like Liberty Home Guard take over the stress and expense.

Key Actions for Homeowners:

Avoid slamming the oven door, which can damage internal components.
Keep heating elements clean and free from debris.
Calibrate the oven using the settings in your user manual if temperatures seem off.
Run regular diagnostics using built-in features (if your model includes them).
Schedule routine maintenance for gas ovens to keep igniters functioning properly.

Most Common Repairs Needed to Fix a KitchenAid Oven

When your Samsung oven is not heating, certain repairs are more commonly required than others. Below are the most frequent fixes:

Replace Burned-Out Heating Elements: A failed bake or broil element is a top reason ovens don’t heat.
Install a New Igniter: Weak igniters in gas models are a frequent culprit.

GET YOUR QUOTE

Frequently Asked Questions

Why is my KitchenAid oven not getting hot enough?
The most common reasons include a faulty temperature sensor, damaged heating elements, or the need for calibration.
How do I know if my oven igniter is bad?
If it glows but doesn’t light the burner within 90 seconds, it likely needs replacing.
Can I replace a heating element myself?
In many cases, yes—but always unplug the oven first. If you’re unsure, it’s best to call a technician.
When should I call a technician?
If you’ve tried the basic troubleshooting steps and your oven still won’t heat, it’s time to bring in a professional, especially for gas or control board issues.

Want to view more?

The Most Consumer Centric
Home Warranty Provider.

Homeowners across the country recommend Liberty Home Guard Home Warranty above all others.
Don’t just take our word for it—Liberty Home Guard Reviews speak for themselves!

Oscar was very thorough and competen...

Oscar was very thorough and competent. He arrived on time and finished the electrical work quickly. He was very friendly and answe...

Mimi C.

I did some research before I looked ...

I did some research before I looked for a Home Warranty Company and I also looked at the BBB ratings before I made my decision. Li...

Sally W.

I am impressed with the service I re...

I am impressed with the service I received from Keith Gordon. He explained extensively and clearly what in included in the warrant...

Exie R.

Daniel in Customer service was very ...

Daniel in Customer service was very helpful in setting up a service call. I appreciate the prompt effort.

Frank A.

same day responsive to claim. techni...

same day responsive to claim. technician assigned very quickly. also follow up after completion!

Vince A.

Rocky Phillips was very nice and hel...

Rocky Phillips was very nice and helpful amazing person, very patient, and very good to work with. Overall amazing &nbs...

Seven S.

I've been with Liberty for three yea...

I've been with Liberty for three years now and very pleased on how they process claims and pay on time. Looking forward to working...

Rathin S.

This is review is for Kato Nunez. He...

This is review is for Kato Nunez. He was a great in resolving my issue. I really appreciate his patience and excellent customer se...

Mohammad K.

Orlando Peralta provided excellent c...

Orlando Peralta provided excellent customer service. He thoroughly explained the status of my claim and what I needed to do. He pr...

JSL

Jay Cruz was great about explaining ...

Jay Cruz was great about explaining the contractor onboarding and very helpful with process

Ricky S.