Why is my Samsung washer not starting a cycle?

Common causes include power supply issues, a faulty door lock assembly, a defective control board or user interface board, or accidental activation of settings like Child Lock or Delay Start.

How do I reset my Samsung washer when it won’t start a cycle?

Unplug the washer for about 5 minutes, then plug it back in. This resets the control panel and may resolve minor glitches preventing the cycle from starting.

How can I tell if the door lock is the issue?

If the washer door doesn’t latch properly or you don’t hear a clicking sound when you close it, the door lock assembly may be malfunctioning and require replacement.

Samsung washer won’t start cycle

When your Samsung washer won’t start a cycle, it can be frustrating, especially when you rely on it for your weekly laundry day. Whether it's a simple glitch or an underlying mechanical issue, there are several possible reasons why your washer is not starting. Fortunately, many of these problems can be diagnosed and fixed with a bit of troubleshooting. Discover the common reasons why your Samsung washer won’t start and get a step-by-step approach to resolve the issue.

Key reasons for the problem:

40% of reported issues are the

Door Lock Assembly

35% of reported issues are the

Control Board

20% of reported issues are the

User Interface Board

5% of reported issues are the

All Other Causes

Diagnostic and troubleshooting steps

Is your Samsung washer not starting its cycle? This step-by-step guide covers everything from door latches to control boards, and offering practical solutions.

Step 1:

Check the Power Supply

Ensure the washer is properly plugged into the electrical outlet.
Test the outlet with another device to make sure it’s working.
If you have a circuit breaker panel, check if the breaker for the washer has tripped and reset it if necessary.

Step 2:

Inspect the Door Lock

Confirm that the door is securely closed and latched.
Listen for the clicking sound that indicates the door is locked.
If the door lock is faulty, it may need to be repaired or replaced.

Step 3:

Check the Water Supply Hoses

Ensure the water supply valves are fully open.
Inspect the hoses for any kinks, clogs, or damage that might prevent water from entering the washer.
Clear any blockages or replace hoses if necessary.

Step 4:

Verify Washer Settings

Check if the child lock or delay start function is activated.
Reset the washer by pressing and holding the “Pause/Cancel” button for 3-5 seconds.
Ensure you haven’t accidentally activated any special settings, such as “Spin Only” or “Rinse Hold.”

Step 5:

Test the Power Button or Start Switch

Press the start button firmly. If it feels loose or doesn’t make a clicking sound, it could be faulty.
If the start switch is not working, it may need to be repaired or replaced.

Step 6:

Reset the Control Panel

Unplug the washer for 5 minutes to reset the control panel.
Plug it back in and attempt to start the cycle again.
If the control panel is unresponsive or displays error codes, there may be a deeper electrical issue that requires professional attention.

Step 7:

Check for Error Codes

Some Samsung washers display error codes on the control panel when something goes wrong.
Refer to your user manual or the manufacturer’s website to decode the error message and understand what part may need repair.

Step 8:

Get a Home Warranty for Reliable Appliance Coverage

Ensure your appliances are covered by a reputable provider such as Liberty Home Guard.

Key actions for homeowners:

Regularly clean the door seal.
Inspect hoses periodically for signs of wear, blockages, or leaks.
Avoid overloading the washer.
Use the correct detergent to prevent excessive suds.
Have your washer inspected by a professional annually to ensure all components are in good condition.

Most common repairs needed to fix samsung washers

When your washer won’t start a cycle, certain repairs are more commonly required than others. Below are the most frequent fixes:

Fix the Power Supply: Issues with the power cord, outlet, or a tripped circuit breaker can interrupt the power supply to the washer. Inspecting and fixing these issues can get the washer working again.
Repair or Replace the Control Board: The control board is the brain of your washer. If it’s faulty, it can cause the washer to stop responding or fail to start a cycle altogether.
Replace the Timer: If the timer is faulty, it may prevent the washer from advancing through the cycle. Replacing the timer can fix the issue and allow the washer to start properly.
Replace the Motor Control Board: The motor control board manages the washer’s motor functions. If it fails, the motor won’t run, and the washer won’t start. Replacing the board may be necessary.

Frequently Asked Questions

Why is my Samsung washer not starting a cycle?
There are several reasons your Samsung washer may not be starting. Common causes include issues with the power supply, a malfunctioning door lock, a faulty control board, or a problem with the water inlet valve. It could also be a result of settings like child lock or delay start being accidentally activated.
How do I reset my Samsung washer when it won’t start a cycle?
To reset your Samsung washer, unplug it from the power outlet for 5 minutes. This will reset the control panel and potentially fix minor glitches. After plugging it back in, try starting a cycle again.
How can I tell if the door lock is the problem with my Samsung washer?
If the washer's door isn’t locking properly, it won’t start. You should hear a clicking sound when the door is closed. If you don’t hear this sound or the door feels loose, the door lock assembly may be malfunctioning and need to be replaced.
Can I fix a Samsung washer that won’t start a cycle myself?
Some issues, like checking the power supply, resetting the washer, or ensuring the door is securely closed, can be easily fixed on your own. However, more complex issues like a faulty control board or motor may require professional repair. Always consult the user manual or a qualified technician for further assistance.

Want to view more?

The Most Consumer Centric
Home Warranty Provider.

Homeowners across the country recommend Liberty Home Guard Home Warranty above all others.
Don’t just take our word for it—Liberty Home Guard Reviews speak for themselves!

Nai was Excellent at servicing my ca...

Nai was Excellent at servicing my call. Excellent customer service and response.

Maria MA.

A great company for veterans!

P Kennebrew

Rocky Phillips, the Supervisor of th...

Rocky Phillips, the Supervisor of the Vendor Relations Department at Liberty Home Guard, is an exceptional manager at Liberty Home...

Wes

Ely provided excellent service. Very...

Ely provided excellent service. Very helpful and knowledgeable! I spoke with Justin regarding my claim status and he was very help...

Bill C.

The technicians arrived on time and ...

The technicians arrived on time and completed on time. They were very professional. They kept in communication throughout the proj...

Rae J.

Liberty Home Guard is so supportive ...

Liberty Home Guard is so supportive and follows through to make sure the repair is complete. I am treated with courtesy and respec...

Pat F

Annie Nunez was awesome calling us t...

Annie Nunez was awesome calling us to take care of a valued customer. We couldn’t be more thrilled to continue working with her ...

Cole J.

George Morel is great at his job! Ve...

George Morel is great at his job! Very polite. A pleasure to work with.

Denise A.

Super nice and professional

Elevate

Rocky Phillips helped me tremendousl...

Rocky Phillips helped me tremendously to get my authorization and approval number on my recent claim. Couldn't be happier!

Larry P